5A02 5052 H32 H112 aluminum coil stock

5A02 5052 Aluminum coil is Al-Mg rust-proof aluminum alloy, which cannot be heat treated and strengthened. The alloy has a low magnesium content, a high plasticity, a good shape, and a low strength, but is stronger than the 3A21 alloy aluminum plate. Cold deformation can increase its strength while plasticity decreases. The alloy has good corrosion resistance and is suitable for use in marine environments. The alloy has good weldability. The machinability is poor in the annealing state, and the semi-cold hardening state can improve the machinability.
 
5052 Aluminum coil stock data sheet
 

Alloy	Temper	Thickness（mm）	Width（mm）	Length(mm)	Application
5A02 5052 aluminum coil stock	O、H24、H32、H34、H112	0.15-0.5	300-1600	800-6000	Ship structure, fuel tank, gasoline and lube conduit, flanges, etc.

 
Chonioal composition
 

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Others		Al
									Every	Total
5A02	0.4	0.4	0.1	0.15-0.4	2.0-2.8			0.15	0.05	0.15

 
Mechanical properties
 

Aluminium alloy & temper	Rm/Mpa  Tensile Strength	Rp0.2/Mpa   Proof Strength	A/%    Percentage elongation after fracture	HB Hardness
5A02 5052-H32	210-260	130	5	61

 
Typical applications
 
      5A02 5052 aluminum alloy coil  is suitable for welded structures and containers with high process plasticity requirements and good corrosion resistance, such as fuel tanks, gasoline and lubricant pipes, nails, flanges, and lightly loaded parts, interior trim parts for ships and vehicles, etc. The wire is used as a rivet or electrode.